$229.00 $525.00

Brand: Kenwood

Left in Stock


Share on:

Product Description

Save money, buy a pre-owned Kenwood NX-700 or NX-700H Nexedge radio kit!  The Kenwood NX-700 is a VHF 512 CH Nexedge Digital radio - available in 30 and 45 watts.  Capable of LTR Trunking or Conventional integrations.  NX-700 mobiles provide the performance, power and quality for reliable communications in a wide range of mobile applications and environments.  

What's Included:

Radio Features:

  • Power:  NX700 = 30 Watts,  NX700H = 45 Watts
  • Channels:  512 CH / 128 Zone / 250 CH max per zone
  • Body Dimensions (inches): 6-5/16" W x 1-1/16" H x 5-3/8"
  • Weight: 2.6lbs
  • Narrowband Compliant – 12.5 kHz and 25 kHz channel spacing

***Our radios are pre-owned but each one is bench tested by factory-trained technicians before it is sold.  Unless otherwise stated these units may have minor cosmetic blemishes consistent with a used product.  The 6 month warranty covers the radio and internal component failure; it excludes physical/water damage and accessories. Accessories are covered by a 90 day warranty.

Additional Radio Features:

GENERAL FEATURES

• 30W / 50W (136-174 MHz) Models
• Dash & Remote Mount
• 14 Character Alphanumeric Aliases
• Backlit Dot Matrix LCD
• 3-Digit Sub-Display
• Function/Status LCD Icons
• RSSI Indicator
• Date & 12/24 Hour Time Clock
• Transmit/Busy/Call Alert/Warn LED
• On/Off Power Control
• 4 Up/Down Selectors
• 6 Front PF Keys
• Emergency/AUX Key
• 4W Speaker Audio
• Emergency Call Features
• Lone Worker
• Multi-Language Display
• Programmable TX/RX Indication (On/Off)
• Special Alert Tone Patterns
• Time Out Timer
• Busy Channel Lockout
• DB-25 Accessory Connector
• 9 Programmable AUX I/Os
• 2 Programmable AUX Outputs
• Ignition Sense
• Public Address / Horn Alert Option
• MIL-Spec Standard Mic
• MIL-Spec 12-Key DTMF Mic Option
• KPG-111D Windows® FPU
• Flash Firmware Upgrading
• Front Panel Test & Tune
• Cloning
• MIL-STD-810 C/D/E/F
• MIL-STD “Driven-Rain”
• IP-54/55 Water & Dust Intrusion
• Easy Option Port
• PC Serial Interface
• SDM Manual Input1
• Transparent Data Mode1
• GPS Receiver Option
• VGS-1 Voice Guide / Voice & GPS Data

 

 

DIGITAL – COMMON

  • NXDN® Digital Air Interface • AMBE+2TM VOCODER
  • 6.25 & 12.5 kHz Channels
  • Over-the- Air Alias
  • Paging Call
  • Emergency Call
  • All Group Call
  • Status Messaging
  • Remote Stun/Kill
  • Remote Check1
  • Short & Long Data Messages
  • GPS Location with Voice1
  • NXDN® Scrambler Included (Conventional: per CH)

DIGITAL CONVENTIONAL MODE

  •  64 Radio Access Numbers (RAN) • DTMF (Encode/Decode)
  • Individual & Group Selective Call • Mixed FM/Digital Operation

DIGITAL TRUNKING MODE

  • Individual Private Call
  • Group Call
  • Broadcast Call
  • Transmission Trunked Mode2 • Message Trunked Mode
  • Call Queuing with Priority2 • Call Queue Pre-emption2
  • Late Entry (UID & GID)2
  • 4 Priority Monitor ID’s2
  • Remote Group Add1
  • Failsoft Mode
  • Multi-Site IP Network Compatible

SCAN

  • Single Zone / Multi-Zone / List Scan
  • Dual Priority Scan (Conventional)

FM MODES - GENERAL

  • 25 & 12.5 kHz Channels • FleetSync®/II
  • DTMF Encode/Decode
  • Companded Audio
  • Voice Inversion Scrambler
  • Encryption/ANI Board Control

FM CONVENTIONAL ZONES

  • QT / DQT
  • Two-Tone Decode
  • Single/Two-Tone Encode • Call Key 1-6
  • Operator Selectable Tone

FM LTR® TRUNKED ZONES

  • Kenwood LTR® Features
FleetSync®/II (FM)
  • PTT ID Digital ANI
  • Selective Call & Group Call
  • Status Messaging
  • Emergency Status
  • Caller ID Display
  • Short Text Messages
  • Power On/Off Status Messages
  • Input/Output Status Messages
  • Send/Display GPS
  • PTT ID & Emergency GPS Reporting
  • Status Message Block GPS Reporting
  • Ignition On/Off GPS Reporting

NX700, NX-700, NX 700


Related Products